Fluoramics Full Density PTFE Tape is a multi-purpose and oxygen-approved PTFE tape suitable for use in all situation. May be used alone or with an approved pipe sealant. Approved for use with Fluoramics’ pipe sealants.

KEY BENEFITS

• Oxygen Tested: ASTM G72
• Approvals: MIL-T-27730A, A-A-58092
• Full Density
• Temperature Range: -450 degrees F to +700 degrees F
• Pressure Rating*: 10,000 psi general use, 5004 psi pure oxygen.

*Pressure rating is relative to the torque and quality of the threads and the amount of tape and sealant used. Maximum oxygen pressure limit guide only. Can be used at pressures above this limit with justified Fire Risk Analysis.

USES

For threads up to 1-1/2″ in diameter, use 1/2″ wide tape.
For larger diameter pipe threads, use 3/4″ wide thread tape.

Chemical Compatibility Chart

Fluoramics Full Density PTFE Tape may be used with . . .

• Acids
• Air
• Alkalis
• Bottled Gases
• Chlorine
• Corrosive Chemicals
• Hydraulic Lines
• Hydrocarbons
• Large Diameter Piping
• Natural Gas
• Oxygen
• Potable Water
• Propane
• Refrigerants
• Sewage
• Solvents
• Sprinkler Systems
• Steam

For tips on how to apply Full Density PTFE Tape, watch here.